Factory：
Specification：
Quantity：
 
|
EN AW-6101A T5/T6 aluminium busbar, American deformed aluminium and aluminium alloy, 6101 aluminium alloy for high strength conductive materials. 55% IACS guarantees good corrosion resistance and weld ability for processing high strength bus conductors.
Henan signi aluminum Co., Ltd. manufactures EN AW-6101A T5/T6 aluminium busbar with thickness of 2 mm to 100 mm, width of 5 mm to 500 mm and length of 4 m/6 M. It can be customized and has complete moulds of various sizes. It is exported to the United States, Mexico, Canada, Japan and so on.
Chemical composition of EN AW-6101A T5 aluminium busbar :
| CHEMICAL ANALYSIS（%） | |||||||||
|
Element |
Si | Fe | Cu | Mn | Mg | Zn | Cr | Ti | Al |
|
Standard Value |
0.3-0.7 | 0.4 | 0.05 | — | 0.4-0.9 | — | — | — | REM. |
| PHYSICAL and MECHANICAL PROPERTIES According to EN755-2 | |||||
|
Inspec. Item |
Rm (Mpa) Tensile Strength |
Rp0.2 (Mpa) Yield Strength |
（%）A Elongation |
（HB） Hardness |
（mm） Bend Radius |
|
Standard Value |
200 | 170 | 8% | / | / |
Mobile：86 17344894490
Email：service@signialuminium.com
Address：A126 Building 4, No.89 Science Avenue,National HI-Tech Industry Development Zone,Zhengzhou,Henan
