Send Inquiry x
I can help you
Send

6063 Aluminium Flat Bus Bar


Current Position :Home/Alloy Busbar/6063 Aluminium Flat Bus Bar/


6063 Series Extruded Aluminium Flat Bar

Author : frank   Time:2016-03-07   Source :Original
Summary :6063 Series Extruded Aluminium Flat Bar We are among the topmost manufacturers suppliers and exporters...

6063 Series Extruded Aluminium Flat Bar

    We are among the topmost manufacturers, suppliers, and exporters of supreme quality 6063 Aluminum Square Bar. These products are manufactured from high quality aluminum, which is obtained from reliable vendors. The offered bars find vast application in various nuclear reactor components, heat treatment furnace, and petrochemical industries. Our logistic professional ensures that these bars are delivered in stipulated time constraint at customers’ end.

Alloys and Tempers
    Pure aluminum has a conductivity of about 65 percent of the International Annealed Copper Standard (lACS). Aluminum can be produced 99.99 percent pure; however, this purity is costly to achieve and the mechanical properties are low.
    Alloy 6063 has been widely used for outdoor high voltage substation buses because of its excellent mechanical and electrical properties and its availability and economy. Where high strength is desirable and conductivity requirements are lower, alloy 6061-T6 bus is used. Where high conductivity is reqnired, with a minimum sacrifice in mechanical properties, alloy 6101 is used in a variety of shapes.

    Other aluminum alloys may be used for bus conductors. However, they should be used with care since conductivity and mechanical properties can be greatly affected by small amounts of alloying elements.



Basic info :
Model No : 6063;
Shape : flat;
Grade : 6000 series;
Application : Door & Window, Decorations,Heat Sink,Glass Wall, Transportation Tools;
Temper : T3-T8;
Alloy : Alloy;
Surface Finishing : Mill Finish;
Alloying Ingredient : 6063;
Certification : ISO;
Export Markets : Global;

Chemical properties

Alloy Si Fe Cu Mn Mg Cr Ni Zn Ti Ga V Others Aluminium
min.
Each Total
6063 0.2-0.6 0.35 0.10 0.10 0.45-0.9 0.10 - 0.10 0.10 - - 0.05 0.15 Remainder

Additional Info :
Trademark : Signi;
Packing : Standard Seaworthy Packing;
Production Capacity : 6000 Tons/Month;
Origin : Zhengzhou,China;
Payment Terms : L/C, T/T, Paypal, Money Gram, Western Union;
Trade Terms : FOB, CFR, CIF, FAS, FCA, EXW;

Features :
This is generally considered to be an extrusion alloy that is heat treatable for strengthening
Aluminum bar is an extruded aluminum product available flat, square or rounded
Bar is used for stamping, casting or machining a finished product
Aluminum’s anti-corrosion, high strength, low weight and thermal conductive properties are useful for support, structural and high heat applications
6063 aluminum bar is known primarily as an architectural grade of aluminum due to its attractive, smooth finish
It exhibits the same strength, light weight and anti-corrosion properties as other grades
6063 aluminum is also easy to form, extrude and weld, making it a good material for custom decorative components
Anodizing increases its corrosion-resistance for exposed products
6063 T-52 is an aluminum alloy, with magnesium and silicon as the alloying elements
Generally, it has good mechanical properties and is heat treatable and weldable
6063 is mostly used in extruded shapes for architecture, particularly window frames, door frames, and roofs.
It is typically produced with very smooth surfaces fit for anodizing
It displays very good corrosion resistance, medium fatigue strength and good cold formability

Properties
Aluminium and Copper Specifications

Parameters Aluminium Copper
Relevant Standards IEC 60105
ISO 209-1,2
IEC 60028
Grade 6101 100% IACS
Physical Properties
Chemical Composition
Specific Heat     gm.cal/℃
Density         gm/cm2
Melting Point    ℃  
 
 
0.092
2.91
660
 
99% pure
0.220
8.89
1083
Mechanical Properties
Ultimate Tensile Strength      kgf/mm2
Ultimate Shearing Strength    kgf/mm2
Elastic Modulus             kgf/mm2
0.2% Tensile-proof Strength   kgf/mm2
 
20.5/25
15
6,700
16.5/22
 
22-26
16-19
12000
60-80% of tensile strength
Electrical Properties
Specific Resistance         ʋʊcm
Volume Conductivity       ʋʊmm2
Conductivity              % IACS
Co-efficient of expansion    mm/m/℃
 
3.133
31.9
57
2.3*10-5
 
1.7241
58
100
1.73*10-5

Production Description :
Aluminum Flat Bar
Alloy : 6063;
Temper: H112, F, T3, T4, T5, T6
Thickness: Up to 200mm
Width: Up to 600mm
Length: Up to 6000mm
Specifications:
Ultimate Tensile Strength, psi: 27,000
Yield Strength, psi: 21,000
Hardness: 60
Chromium: 0.1 max
Copper: 0.1 max
Iron: 0.35 max
Magnesium: 0.45 - 0.9
Manganese: 0.1 max
Remainder Each: 0.05 max
Remainder Total: 0.15 max
Silicon: 0.2 - 0.6
Titanium: 0.1 max
Zinc: 0.1 max
Thicknesses: 0.1875" to 4.5"
Widths: up to 6"
Diameter: 0.1875" to 12.125"
Sizes: 0.375" to 6"


Applications :
Commonly used in the manufacture of furniture, windows, stair rails, and in pipe railing
Commonly used in architectural extrusions
6063 aluminum bar is used for extruded and formed parts that can combine support with decoration
It is used for trim, decorative screens and grates and ornamental frames and supports.




Click to Download Signi Aluminium Mould List Table Excel Files :

Signi Aluminium Mould List.xls



SHARE :

Related Reading :

CONTACT US
Contact
联系我们
Looking Forward to Your Response!

Tel:037155689814

Phone:13673369503

Fax:+86-371-55686475

Mobile:13673369503

Skype:signialuminium

Email:frank@signialuminium.com

Address:A126 Building 4, No.89 Science Avenue,National HI-Tech Industry Development Zone,Zhengzhou,Henan

[UP]