Send Inquiry x
I can help you
Send

1350 Aluminium Flat Bus Bar


Current Position :Home/Alloy Busbar/1350 Aluminium Flat Bus Bar/


1350 aluminium flat bar

Author : frank   Time:2016-03-07   Source :Original
Summary :1350 aluminium flat bar Alloys and Tempers Pure aluminum has a conductivity of about 65 percent...

1350 aluminium flat bar

Alloys and Tempers
    Pure aluminum has a conductivity of about 65 percent of the International Annealed Copper Standard (lACS). Aluminum can be produced 99.99 percent pure; however, this purity is costly to achieve and the mechanical properties are low.
    Aluminum 1350 is a commercial high-purity aluminum with 61 percent conductivity. The tensile strength of each 1350 temper is determined by the amount of work given the metal during fabrication. Today, most 1350 aluminum bus conductors are of -Hlli temper for extrusions, -H112 for sawed rolled plate, and -F for cast bars.
    Other aluminum alloys may be used for bus conductors. However, they should be used with care since conductivity and mechanical properties can be greatly affected by small amounts of alloying elements.

Packaging Details:
Delivery Detail: 2 - 3 weeks ( depends on quantity )
Place of Origin: Zhengzhou, China (Mainland)
Brand Name: Signi
Model Number: AL1050
Material: Aluminum
Product Name: Customized Aluminum Busbar
Surface Treatment: Zinc, Nickel, Tin, Silver, etc.
Tolerance: +/- 0.1mm
Length: up to 6m
Width: 10mm - 200mm
Thickness: 0.15mm - 40mm
Application: Electric
Processing: Stamping, Bending, Drilling, Threading, Polishing, etc.


Flatwise Bending Radius
 

Type of Bar Alloy and Temper Thickness  in. Radius  min.
  1350-H11 All 1 * thickness
Extruded 6101-H11 0.250-0.750
0.751-1.000
1 * thickness
2 * thickness
6101-T6 0.125-0.375
0.376-0.500
2 * thickness
21/2 thickness
6101-T61 0.125-0.500
0.501-0.749
0.750-1.000
1.001-1.625
1 * thickness
2 * thickness
3 * thickness
4 * thickness
6101-T63 0.125-0.375
0.376-0.500
0.501-1.000
1 * thickness
11/2 thickness
21/2 thickness
6101-T64 0.125-0.750
0.751-1.000
1 * thickness
2 * thickness
6101-T65 0.125-0.500
0.501-0.749
1 * thickness
2 * thickness
Rolled 1350-H12 All 1 * thickness
Sawed plate 1350-H112 All 1 * thickness
 
 Applicable to widths up through 6 inches in the T6,T61,T63 and T65 temper and to widths up through 12 inches for all other listed tempers. Bend radius for greater widths are subject to inquiry.

Chemical  Composition
Si Fe Cu Mn Mg Cr Zn V+Ti Others Al.
                Individual Total  
Max. 0.10 Max.
0.40
Max.
0.05
Max.
0.01
 — Max
0.01
Max.
0.05
Max.
0.02
Max.
0.03
Max
0.10
Min. 99.50

Properties
Aluminium and Copper Specifications

Parameters Aluminium Copper
Relevant Standards IEC 60105
ISO 209-1,2
IEC 60028
Grade 6101 100% IACS
Physical Properties
Chemical Composition
Specific Heat     gm.cal/℃
Density         gm/cm2
Melting Point    ℃  
 
 
0.092
2.91
660
 
99% pure
0.220
8.89
1083
Mechanical Properties
Ultimate Tensile Strength      kgf/mm2
Ultimate Shearing Strength    kgf/mm2
Elastic Modulus             kgf/mm2
0.2% Tensile-proof Strength   kgf/mm2
 
20.5/25
15
6,700
16.5/22
 
22-26
16-19
12000
60-80% of tensile strength
Electrical Properties
Specific Resistance         ʋʊcm
Volume Conductivity       ʋʊmm2
Conductivity              % IACS
Co-efficient of expansion    mm/m/℃
 
3.133
31.9
57
2.3*10-5
 
1.7241
58
100
1.73*10-5

Definitions :
Specific Heat: The heat required to raise the temperature of its unit by mass by 1ºC.(This is a physical property)
Density: This is it’s mass per unit volume. This is defined as mass divided by volume.
Melting Point: The point at which it changes state from a solid to a liquid.
Ultimate Tensile Strength: The maximum stress value as obtained on a stress-strain curve.
Ultimate Shearing Strength: The force that will shear the material, and act in the plane of the area at a right angle to the area subjected at such force.
Elastic Modulus: The ratio of the unit stress to the unit strain within the proportional limits of a material in tension or compression.
0.2% Tensile-proof Strength: (yield strength) The point between 60– 80% of the ultimate tensile strength of the material where a 0.2% permanent deformation will occur.
Coefficient of Expansion: This is the fractional change in length per degree of temperature change.
IACS: International Annealed Copper Standard.


Rectangular angle aluminium busbar
3mm
(thickness)
3*15 3*20 3*25 3*30 3*40 3*50        
4mm
(thickness)
4*10 4*20 4*25 4*30 4*40 4*45 4*50      
5mm
(thickness)
5*20 5*25 5*30 5*35 5*40 5*50 5*60 5*80    
6mm
(thickness)
6*20 6*30 6*40 6*50 6*60 6*80 6*100 6.3*50 6.3*80 ★6.3*100
7mm
(thickness)
7.6*80               6.3*76 ★6.3*63
8mm
(thickness)
8*11 8*30 8*40 8*50 8*60
8*63
8*80 8*100 8*120 8.1*74
10mm
(thickness)
10*30 10*40 10*50 10*60 ★10*63 10*80 10*100 10*120 10*125 10*140
10*150 10*160                
12mm
(thickness)
★12*60 ★12*80 ★12*100 12*120
12*125
12*150
12.5*125
     
14mm
(thickness)
★14*80 ★14*100   Square rod
50*50

35*55
19*19 Six angle rod ★30 ★40
15mm
(thickness)
15*100 15*120   Round rod ★¢10 ★¢12 ¢16 ★¢28 ★¢32 ★¢40
16mm
(thickness)
★16*100 ★16*125   Round rod ★¢45 ★¢46 ★¢50 ★¢55 ★¢60 ★¢65
20mm
(thickness)
★20*80 ★20*100     ★¢70 ★¢75 ★¢80    
 

Round angle aluminium busbar
2mm
(thickness)
R2*20              
3mm
(thickness)
R3*30 R3*40 R3*50 R3*60 R3*80 R3*100 R3*120 R3*160
4mm
(thickness)
R4*25 R4*30 R4*40 R4*50 R4.7*151      
5mm
(thickness)
R5*30 R5*35 R5*40 R5*50 R5*60 R5*120    
6mm
(thickness)
R6*50 R6*60 R6*80 ★R6.3*63 R6*100 R6*120 R6*140 R6*160
8mm
(thickness)
R8*40 R8*50 R8*60 ★R8*63 R8*80 R8*100    
10mm
(thickness)
R10*50 R10*60 R10*80 R10*100 ★R10*120 R10*125 R10*170 R10.4*25
12.5mm
(thickness)
★R12.5*80 ★R12.5*125   ★R16*120      

                                         Mechanical Properties of Aluminum Bus Conductor and Related Alloys
                            (The Aluminum Association ; ASTM B 236, B 241, and B 429; and Manufacturer’s Listings)

 

Product Alloy and Temper Thickness in
Ultimates
Tensile Strength (ksi)
At 20 (68。F)
Typical 
Ultimate
Typical Yield Typical(a) 
Elongation
(Percent - in 2 in. 
Or 4 Dia)
Minimum 
Ultimate
Minimum 
Yield
Extruded rod, bar tube,
pipe and shapes
1350-H111 All 8.5 3.5     35.0
6101-T6 0.125-0.500 29.0 25.0 32.0 28.0 15.0
6101-T61 0.125-0.749
0.750-1.499
1.500-2.000
20.0
18.0
15.0
15.0
11.0
8.0
     
6101-T63
6101-H111
6101-T64
6101-T65
0.125-0.500
0.250-2.000
0.125-1.000
0.125-0.749
27.0
12.0
15.0
25.0
22.0
8.0
8.0
20.0
14.0 11.0  
Extruded pipe(c) 6061-T6
6063-T6
Pipe size 1.0 & 
over Pipe sizes,all
38.0
30.0
 
35.0
25.0
45.0
35.0
40.0
31.0
10.0 min
8.0 min
Rolled bar 1350-H12 0.125-1.000 12.0 8.0 14.0 12.0  
Sawed-plate bar or sheet 1350-H112 0.125-0.499
0.500-1.000
1.001-3.000
11.0
10.0
9.0
6.0
4.0
3.5
    10.0min
16.0min
22.0min
Rolled sheet
(for shearing or forming)
1350
1350-H12
1350-H14
0.020-0.249 8.0
12.0
14.0
  12.0
14.0
16.0
4.0
12.0
14.0
20-30 min
4-9 min
3-6 min
1350-H16
1350-H18
0.020-0.125 16.0
18.0
  18.0 16.0 2-4 min
2-4 min
Cast Alloy for Bus 1350-F 
1050
1 in. And up     8.5 3.5 35.0
Cast Alloy for Fittings A356.0-T61   37.0       5.0

SHARE :

Related Reading :

CONTACT US
Contact
联系我们
Looking Forward to Your Response!

Tel:037155689814

Phone:13673369503

Fax:+86-371-55686475

Mobile:13673369503

Skype:signialuminium

Email:frank@signialuminium.com

Address:A126 Building 4, No.89 Science Avenue,National HI-Tech Industry Development Zone,Zhengzhou,Henan

[UP]